Connecting agricultural tools to the tractor

Connecting the device to the tractor

Javid Kesht Leyzeri Co.Ltd (Mardani Trading)

To connect the car chassis to the tractor, proceed as follows:

1. Move towards the car with reverse gear and stop at a certain distance from the car.

1. Move towards the car with reverse gear and stop at a certain distance from the car.

2 Pull the handbrake.
2 Pull the handbrake.

3 Using hydraulic levers, adjust the side arms in line with the connection points of the machine.
3 Using hydraulic levers, adjust the side arms in line with the connection points of the machine.

4 Move backwards until the connection points of the tractor and the machine coincide.
4 Move backwards until the connection points of the tractor and the machine coincide.

5 Place the left arm and fasten it with a standard pin.
5 Place the left arm and fasten it with a standard pin.

6 Adjust the length of the right arm as needed.
6 Adjust the length of the right arm as needed.

7 Place the right arm and fasten it with a standard pin.
7 Place the right arm and fasten it with a standard pin.

8. Connect the middle arm using the standard pin.

8. Connect the middle arm using the standard pin.


Never place the arms between the tractor and the machine.
Do not connect vehicles with a weight greater than the capacity of the tractor to the tractor.
After installing the car on the tractor, lift the car slowly using the hydraulic lever of the tractor.
At the same time, check that the car does not get stuck on the body of the tractor or does not lift in front of the tractor.

Being in the wrong position

Being in the wrong position