Connecting the baler to the tractor and transporting it
Javid Kesht Leyzeri Co.Ltd (Mardani Trading)
To work with the baler machine, a tractor with power suitable for the type of baler is needed. Connecting the baler to the tractor is the same as connecting other traction machines, with the feature that to transport the baler on the road, it should be placed in the transport position so that it occupies less road width and makes it easy to transport.
Steps to do the work:
1- Turn on the tractor after the initial visits.
2- By guiding the tractor to the rear, connect the baler to the adjustable strap.
3- Connect the garden bailer to the tractor power transmission axis. If the car is equipped with a hydraulic jack, connect its hydraulic hose.
4- Place the baler connected to the tractor in a position where there is no obstacle behind it.
5- Raise the receiver by hand and place the pin of the holder under the axis of the product guide and fix it.
6- By pulling the rope behind the driver's seat, release the status change pin from inside the chassis.
7- Slowly drive the tractor back so that the baler is placed behind the tractor.
8- If the shovel does not move to the back of the tractor, put a log, wood or stone behind the right wheel and push the tractor back again so that the shovel is behind the tractor.
9- Release the position change pin by releasing the rope so that it fits into the hole in the chassis.
To put the baler in working condition, proceed as follows:
10-Put the tractor and the baler attached to it in a position where there are no obstacles in front of them or beside them.
11-Remove the status change pin by pulling the corresponding rope from the chassis hole.
12-Slowly drive the tractor forward so that the baler is in working position on the side and behind the tractor.
13- If the baler does not move to the side and back of the tractor, put a log, wood or stone in front of the right wheel and move the tractor forward again.
14-Place the status change pin by releasing the rope in the hole on the right side of the chassis.
Click on the link below to see the pictures of the Biler products:
Sale of balers (CLASS, FAMAROL, STAR, JOHN DEERE, GALLIGNANI)
Recent News
