Transportation of the mower connected to the tractor
Javid Kesht Leyzeri Co.Ltd (Mardani Trading)
Mowers are usually placed on the right side of the tractor during operation. At the same time, the tractor can pass through the path whose fodder has already been harvested by the mower. In this situation, moving on the road is problematic because a large width of the road will be taken by tractors and mowers. To solve this problem, mowers have equipment that can be moved to the back of the tractor to move on the road. Different methods may be used for this. In some Mowers, the change of position is done hydraulically and in others it is done manually.
Mower in working condition
Mower in transport mode
Changing the state of the Drum mover from the work state to the transport state and vice versa
Steps to perform the activity
1- Remove the safety latch pin from the relevant plug and remove the latch from the plug.
Removing the locking pin from the prong of the Drum mover
2-Turn the three-point connector of the mower to the right.
Connecting the three-point chain of the mower and turning it to the right in the Drum mower
3- Turn the locking lever of the position changing rod clockwise.
4- Mount the position changing rod on the fork where the safety latch is installed and install its pin.
Mounting the position changing rod on the fork where the safety latch is installed and installing its pin in the Drum mower
5- To change the status to working mode, follow the steps above.
Changing the mode of the Knife cutter mower from work to transport
Steps to perform the activity
1- Lift the end of the shoulder from the ground.
2- Screw the corresponding rod to the shoulder handle.
3-Make sure that the relevant nut is tightened.
Knife Cutter mower in two modes of work and transportation
Click on the following links to view pictures and videos of the hay cutting product (mower):
The image of TINAZ Turkey hay cutting types
The video of TINAZ Turkey hay cutting types
Recent News
